IMG_8036-small

F3

The self-propelled F3 is the Sicma’s top harvester, available with 2 engines, 90 or 103 kW FPT (Fiat Powertrain Technologies) engines, both Stage V. It is characterized by the independent 3-wheel drive and the rear steering wheel.

The F3 harvests indifferently olives, nuts (i.e. walnuts, almonds, pecans, macadamia, etc.), sour cherries and other hanging fruits. It works in different growing conditions, either on flat or sloping grounds, exploiting the power of the engine and the exclusive handling of the 3-wheel system which allows high maneuverability, even in reduced spaces.

The F3 is approved by the Italian Ministry of Transport and Navigation and falls within the requirements for the Industry 4.0 incentives.

The F3 can be equipped with standard, overturning or telescopic arm with double extension (triplex arm), other than the standard or tilting reverse umbrella, hydraulic lever distributor, electro-hydraulic joystick, rear camera with monitor, etc. Once harvest ends, the F3 drive unit can be coupled with different devices, for instance pruning bars for hedging & topping, forks, etc ……………….

Configure yours now !!!

DOWNLOAD THE BROCHURE

REQUEST INFO

Technical Characteristics of F3 125 and F3 140:

TECHNICAL CHARACTERISTICS	F3 125	F3 140
ENGINE	Diesel, FPT (Fiat Powertrain Technologies) F36, (4 cylinders), Stage V, 3.660 cm³ – 90 kW @ 2.300 rpm	Diesel, FPT (Fiat Powertrain Technologies) N45, (4 cylinders), Stage V, 4.500 cm³ – 103 kW @ 2.220 rpm
CHASSIS	Monoblock in tubulars and sheets. Open cabin and roll-bars
TRANSMISSION	Hydrostatic, independent 3-wheel drive. The rear wheel steers
CONTROLS	Steering wheel, motion pedal and vibration joystick. Service hydraulic lever distributor
VIBRATING HEAD	New Generation at high frequencies, self-centring, self-braking. Two vibrating speeds
PLIER OPENING	60 cm	65 cm
TIRES	405 x 70 – 20”	Front 440 65 R24” – Rear 440 65 R20”

SIZE & WEIGHT	F3 125	F3 140
TOTAL LENGTH	5.500 mm and 7.700 with telescopic arm overturned or retracted, respectively
MAX WIDTH	2.280 mm (without reverse umbrella)
CASE CAPACITY (IF EQUIPPED WITH UMBRELLA)	400 kg
UMBRELLA DIAMETER	Ø 5, 6, 7, 8, or 9 m
MAX RECOMMENDED UNLOADING HEIGHT	2.250 mm
HYDRAULIC EXTENSION OF THE ARM	1.000 mm (+1.000 mm with triplex arm)
TOTAL WEIGHT (WITHOUT/WITH REVERSE UMBRELLA)	5.415 kg/6.150 kg	5.980 kg/6.730 kg

OPTIONAL:

- Closure pressure jaw valve
- Electro-hydraulic joystick
- Triplex arm double extension
- Hydraulic balancing reverse umbrella (with cylinders)
- Umbrella bar extensions