The self-propelled F3 is the Sicma’s top harvester, available with 2 engines, 90 or 103 kW FPT (Fiat Powertrain Technologies) engines, both Stage V. It is characterized by the independent 3-wheel drive and the rear steering wheel.
The F3 harvests indifferently olives, nuts (i.e. walnuts, almonds, pecans, macadamia, etc.), sour cherries and other hanging fruits. It works in different growing conditions, either on flat or sloping grounds, exploiting the power of the engine and the exclusive handling of the 3-wheel system which allows high maneuverability, even in reduced spaces.
The F3 is approved by the Italian Ministry of Transport and Navigation and falls within the requirements for the Industry 4.0 incentives.
The F3 can be equipped with standard, overturning or telescopic arm with double extension (triplex arm), other than the standard or tilting reverse umbrella, hydraulic lever distributor, electro-hydraulic joystick, rear camera with monitor, etc. Once harvest ends, the F3 drive unit can be coupled with different devices, for instance pruning bars for hedging & topping, forks, etc ……………….
Configure yours now !!!
Technical Characteristics of F3 125 and F3 140:
|TECHNICAL CHARACTERISTICS||F3 125||F3 140|
|ENGINE||Diesel, FPT (Fiat Powertrain Technologies) F36, (4 cylinders), Stage V, 3.660 cm3 – 90 kW @ 2.300 rpm||Diesel, FPT (Fiat Powertrain Technologies) N45, (4 cylinders), Stage V, 4.500 cm3 – 103 kW @ 2.220 rpm|
|CHASSIS||Monoblock in tubulars and sheets. Open cabin and roll-bars|
|TRANSMISSION||Hydrostatic, independent 3-wheel drive. The rear wheel steers|
|CONTROLS||Steering wheel, motion pedal and vibration joystick. Service hydraulic lever distributor|
|VIBRATING HEAD||New Generation at high frequencies, self-centring, self-braking. Two vibrating speeds|
|PLIER OPENING||60 cm||65 cm|
|TIRES||405 x 70 – 20”||Front 440 65 R24” – Rear 440 65 R20”|
|SIZE & WEIGHT||F3 125||F3 140|
|TOTAL LENGTH||5.500 mm and 7.700 with telescopic arm overturned or retracted, respectively|
|MAX WIDTH||2.280 mm (without reverse umbrella)|
|CASE CAPACITY (IF EQUIPPED WITH UMBRELLA)||400 kg|
|UMBRELLA DIAMETER||Ø 5, 6, 7, 8, or 9 m|
|MAX RECOMMENDED UNLOADING HEIGHT||2.250 mm|
|HYDRAULIC EXTENSION OF THE ARM||1.000 mm (+1.000 mm with triplex arm)|
|TOTAL WEIGHT (WITHOUT/WITH REVERSE UMBRELLA)||5.415 kg/6.150 kg||5.980 kg/6.730 kg|
Innovation and Technology MADE IN ITALY
SICMA S.r.l. di Carchedi Francesco
Località Callipo Zona Industriale
88022 Acconia di Curinga (CZ) - Italy